University of Sussex
Browse

Binary THz modulator based on silicon Schottky-metasurface

Download (1.65 MB)
journal contribution
posted on 2025-07-04, 14:07 authored by S Ahadi, Mohammad NeshatMohammad Neshat, MK Moravvej-Farshi
We propose a metasurface THz modulator based on split-ring resonators (SRRs) formed by four interconnected horizontal Si–Au Schottky diodes. The equivalent junction capacitance of each SRR in the proposed modulator is much smaller than that of the previously reported metasurface counterparts with vertical Schottky junctions, leading to a higher modulation speed. To modulate a THz incident signal by the proposed metasurface, we vary the bias voltage externally applied to the Schottky junctions. Applying a reverse bias of VA = − 5 V to the Au gate, two LC resonances at 0.48 THz, and 0.95 THz are excited in the metasurface. Switching the applied voltage to VA = + 0.49 V, we diminish the oscillator strengths of the LC resonances, creating one dipole resonance at 0.73 THz in the transmission spectrum of the metasurface modulator. The modulation depths at these resonances are more than 45%, reaching 87% at 0.95 THz. The phase modulation for this THz modulator is about 1.12 rad at 0.86 THz. Furthermore, due to the particular design of the meta-atoms, the modulation speed of this device is estimated up to approximately several hundred GHz, which makes this device an appropriate candidate for high-speed applications in wireless communications systems based on external modulators.

History

Publication status

  • Published

File Version

  • Published version

Journal

Scientific Reports

ISSN

2045-2322

Publisher

Springer Science and Business Media LLC

Issue

1

Volume

12

Article number

18871

Department affiliated with

  • Engineering and Design Publications

Institution

University of Sussex

Full text available

  • Yes

Peer reviewed?

  • Yes